Hi all,I achieved the NSE4 - FortiOS 7.2 Certification on September 21
2023. I am trying to get FCP certified but because of the certification
transition, I am unsure which certificates I still have to achieve in
order to get FCP certified.I think th...
Hi All,Last weekend we replaced a 200E with 120G. The 200E was managed
by Fortimanager and was logging to fortianalyzer. After the replacement
I was unable to get the 120G to log to FAZ or to be managed by FMG.For
the connection to FAZ:When I enable ...
Hi JasonRebooting the FAZ and FMG and later enabling the fabric
connectors did not change anything, this was something I did not test
before. I would like to reboot the FGT but for this I have to request
downtime which I will not get for a couple of ...
This is the output for FAZ: config log fortianalyzer setting set status
enable set server "10.250.32.164" set serial "FAZVMXXX" (correct FAZ
serial number) set source-ip "10.162.4.1" end Note: only with the
10.162.4.1 ip (the policy allowed IP) I am ...
Hi JasonADOM mode is enabled on both devices, I made sure to check in
the root ADOM for the unauthorized devices. I tested adding the devices
from the root ADOM on FMG and FAZ to the FGT to test the device
registration from both sides but this did no...
