I have 40F firewall.I have a setup a lan to wan, when plugged in on
interface 1 can get internet and can see the gateway. I removed
interface 2 and 3 from the hardware switch and made a new hardware
switch with port 2I added a vlan to port 2ipaddress...
"And nobody said duplicate the config on lan1/lan hard-switch wouldn't
work."-not really what I was implying....I have created another
interface on port 3 and see the ip, I just have to validate other
devices can ping each other. Long term willl just...
but basically I will need to get a managed switch in order to test off
correct? I believe that makes sense for the vlan. I have my main machine
on port 1 which is hardware switch. I'm kinda surprised I can't just
replicate this on port 2 or 3 with di...
Plugged directly into port 2 on 40F with test device, WAN port goes to
router, and port 1 goes to an unmanaged switch. Do I need to create a
network policy after that?, I thought I should be able to ping a device
once the VLAN is created.
