Hi, the forum search does not work for me at the moment, so i will open
a new thread: Is there any way of monitoring the content of the proxy
cache? I would like to know what is in the cache and if the transparent
proxy works. In previous FortiOs Ver...
Hello all, I have a weird thing with a ppp connection. On a 100D I have
4 Internet uplinks: WAN1 = 10 Mbit SDSL with a provider router between
Fortigate and InternetWAN2 = 10 Mbit SDSL with a provider router between
Fortigate and InternetPort 1 = LTE...
Hi, not 100% sure I'm in the right forum. Anyway, I was running a debug
of the packet flow because I have a problem to solve where an IP-Phone
would not connect to a telephone system via tftp and over a Site 2 Site
VPN. In the debug there was a line ...
Hi, I feel a bit stupid: Where can I find firmware for the FWF 92D? In
the support portal images stop with FWF90D. I have a unit here running
FWF92D-5.00-build292 which is quite old and I am desperately trying to
update to a 5.2.2... Is there a secre...
Hi, I have a 80D with Fortios 5.2 and I am missing something in the web
based manager. When setting up a policy (for a policy based vpn), there
is no longer a selection between firewall policy and vpn policy and I
just can't find the place where to s...
Hello, just for a follow-up. You were absolutely right. The trick was to
set the priority on the interface (not on "ppp1" but on "portX"). The
new priority is not active right away, though. You have to restart the
FGT or at least reconnect the interf...
Hi, very good information! Thank you. I had a chat with tech support and
they told me that 5.0.11 is the latest firmware in line. Their answer to
my question "why is that" was gold: Because 5.0.11 is so good it does
not have to be updated -- don't me...
Dave Hall wrote:If you have not done so already, I suggest setting up
Dead Gateway Detection on both WAN ports. Also I would check the status
on WAN2 (e.g. perform a diag hardware deviceinfo nic wan2) for a
possible duplex/speed issue. What I found o...
emnoc wrote:Qs: Are you using dead-gateway detect? Are you 100% sure the
interface is not going down? Hi, currently,I do not use dead Gateway
detect. For clarification: This would be to monitor if link 2 goes down,
right? I am quite sure that WAN2 is...
Hi Dave, Hi Ede, i talked to the local dealer, he confirmed the numbers
in the comparison matrix (same explanation as Ede provided). I think I
will go for the 90D, because the 80D has just 4 RJ45 Ports total which
is not enough for my needs (I need a...
