Description | This article describes how the user can apply the recurring schedule for the traffic shaper applied for the users in the LAN and at the same time need to apply the one-time schedule for the firewall policy. |
Scope |
FortiGate. |
Solution |
Scenario: If there is traffic shaping configured for the specific LAN users and it is needed for business hours (9-6) the bandwidth can be limited as per the shaper for example to 20MB and later on Bandwidth capping should be applied as 50MB.
The same also applies if the firewall policy responsible for the traffic should be disabled after 1 month or specific days.
This means that it is necessary to apply a one-time scheduler for the firewall policy and a recurring scheduler for the traffic shaping.
To overcome this issue, it is possible to apply the recurring shaper in the Traffic Shaping policy and One-Time on the firewall policy.
|