Technical Tip: Enable web cache in IPv4 policy

[naveenk]

Description
This article describes how to enable web cache in IPv4 policy for https.

Solution
To enable web cache and web cache-https in the IPv4 policy make sure that the policy is in proxy-based mode and deep-inspection is enabled in the policy.

Run the below commands  afterwards.

# config firewall policy
    edit <policyID>
        set webcache en
        set webcahche-https en
    end

To verify if the caching is happening , below command can be used.

# diagnose wad webcache list
<period>    10min | hour | day | 30days.