Hi, how can i configure firewall between lan to lan? fortigate type :
fortigate 60 version : 2.80 mr11 network : 192.168.10.0 / 255.255.255.0
my problem :- i wanted create 3 group of user and that group can' t
communicate (file sharing) each other. f...
guys how about email from unknown. if you using linux based email server
you can see the log for the email showing from:<> to etc@etc.com. any
way to block this from:<>
you have mentioned that you have copy from other pc which was work. and
the setting was using manual VIP. i suspect that during you have
connected to the fortigate the other pc also connecting in. so the ip
was confilct. how about you try change th V...
hi all, im not set ip for all of the point in the fortigate. i just
enable the secondary ip for the lan interface. try upgrade to mr3 then
you would know. until now it working perfect.
i' ll upgrade to version 3 mr3 then put 3 secondry ip address and have
solve my problem already. i cant make it in same subnet. unless i did it
as per your example above.but cant go to internet. so i try upgrade the
firmware and found out it have new...
