Support Forum
The Forums are a place to find answers on a range of Fortinet products from peers and product experts.
Milaan
New Contributor II

OSPF Fast-Hello with Cisco 6509

Hello,

 

we are trying to establish an OSPF session with a Cisco 6509 and OSPF Fast-Hello enabled. Sadly, this isn't working. Is anyone having success with Fast-Hello between Cisco and a FortiGate? Without Fast-Hello everything is working.

 

Thanks.

1 REPLY 1
Benoit_Rech_FTNT

Hello,

 

There is no reason that fast-hello doesn't work with Cisco 6509, but:

[ul]
  • fast-hello is only available in FortiOS 5.2
  • The 'hello-multiplier' should be set between (4 and 10).[/ul]

    You can check that the fast-hello has been correctly applied to the interface using

    get router info ospf interface

    <...>

    Timer intervals configured, Hello 0.250, Dead 1, Wait 1, Retransmit 5 <<<< for hello-multiplier = 4

     

    You can also troubleshoot the OSPF neighbor relationship using

    diag ip router ospf all enable

    diag ip router ospf level info

    diag debug enable

    ...

    and then

    diag debug disable

    diag ip router ospf level critical

    diag ip router ospf all disable

     

    Best regards,

    Benoit

  • Announcements

    Select Forum Responses to become Knowledge Articles!

    Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.

    Labels
    Top Kudoed Authors