DescriptionOne of the feature improvement in FortiOS v5.4.x, is the ability to check SFP and QSFP transceiver vendor information. If it is a fiber, then temperature, voltage, and optical power can also be checked.
ScopeThis command is only available on certain of the FortiGate D-series models, such as the FortiGate 100D, 240D, 1500D, 3700D, 3810D and 3815D. The device must also be running FortiOS 5.4.x.
SolutionThe command to use is '# get system interface transceiver' to retrieve information for all interfaces or '# get system interface transceiver <interface>' for a single interface. Sample result is as below:
FG3K2D3Z14800076 # get sys interface transceiver
Interface port1: SFP or QSFP transceiver is not detected.
Interface port2: SFP or QSFP transceiver is not detected.
Interface port3: SFP or QSFP transceiver is not detected.
Interface port4: SFP or QSFP transceiver is not detected.
Interface port5: SFP or QSFP transceiver is not detected.
Interface port6: SFP or QSFP transceiver is not detected.
Interface port7: SFP or QSFP transceiver is not detected.
Interface port8: SFP or QSFP transceiver is not detected.
Interface port9: SFP/SFP+
Vendor Name: Axcen Photonics
Part No. : AXXE-5886-05B1
Serial No. : AX14170008967
Interface port10: SFP or QSFP transceiver is not detected.
Interface port11: SFP/SFP+
Vendor Name: FIBERXON INC.
Part No. : FTM-8012C-SL
Serial No. : A8660061719307
Interface port12: SFP or QSFP transceiver is not detected.
Interface port13: SFP or QSFP transceiver is not detected.
Interface port14: SFP or QSFP transceiver is not detected.
Interface port15: SFP or QSFP transceiver is not detected.
Interface port16: SFP or QSFP transceiver is not detected.
Interface port17: SFP or QSFP transceiver is not detected.
Interface port18: SFP or QSFP transceiver is not detected.
Interface port19: SFP or QSFP transceiver is not detected.
Interface port20: SFP or QSFP transceiver is not detected.
Interface port21: SFP or QSFP transceiver is not detected.
Interface port22: SFP or QSFP transceiver is not detected.
Interface port23: SFP or QSFP transceiver is not detected.
Interface port24: SFP or QSFP transceiver is not detected.
Interface port25: SFP or QSFP transceiver is not detected.
Interface port26: SFP or QSFP transceiver is not detected.
Interface port27: SFP or QSFP transceiver is not detected.
Interface port28: SFP or QSFP transceiver is not detected.
Interface port29: SFP or QSFP transceiver is not detected.
Interface port30: SFP or QSFP transceiver is not detected.
Interface port31: SFP or QSFP transceiver is not detected.
Interface port32: SFP or QSFP transceiver is not detected.
Interface port33: SFP or QSFP transceiver is not detected.
Interface port34: SFP or QSFP transceiver is not detected.
Interface port35: SFP or QSFP transceiver is not detected.
Interface port36: SFP or QSFP transceiver is not detected.
Interface port37: SFP or QSFP transceiver is not detected.
Interface port38: SFP or QSFP transceiver is not detected.
Interface port39: SFP or QSFP transceiver is not detected.
Interface port40: SFP or QSFP transceiver is not detected.
Interface port41: SFP or QSFP transceiver is not detected.
Interface port42: SFP or QSFP transceiver is not detected.
Interface port43: SFP or QSFP transceiver is not detected.
Interface port44: SFP or QSFP transceiver is not detected.
Interface port45: SFP or QSFP transceiver is not detected.
Interface port46: SFP or QSFP transceiver is not detected.
Interface port47: SFP or QSFP transceiver is not detected.
Interface port48: SFP or QSFP transceiver is not detected.
Optical Optical Optical
SFP/SFP+ Temperature Voltage Tx Bias Tx Power Rx Power
Interface (Celsius) (Volts) (mA) (dBm) (dBm)
------------ ----------- --------- --------- --------- --------
port9 34.1 3.31 6.35 -1.9 -40.0 --
port11 N/A N/A N/A N/A N/A
++ : high alarm, + : high warning, - : low warning, -- : low alarm, ? : suspect.
FG3K2D3Z14800076 #