Hello everyone,I'm not sure if I'll get any help on this topic here, but
I'll give it a try anyway.We primarily use FortiClient VPN to establish
a VPN connection to our Fortigate via IPsec using SAML.Some employees
who do not work in the company, but...
Hello everybody,We distribute device scep certificates via intune over a
PKI instance to authenticate our devices via LAN and WiFi via a RADIUS
server. However, our Fortigate does not serve as the RADIUS server. We
use a Cloud Radius server and also ...
Hello all, I have a problem with IPsec SAML under Windows 11 24H2 with
FortiClientVPN 7.4.1.1736 free version. The connection is established,
but I don't see any bytes for incoming traffic. Therefore the routing in
the internal VLAN does not work, al...
Hello all,I am currently in the process of setting up VPN IPsec via SAML
EntraID.I followed this technical
tip:https://community.fortinet.com/t5/FortiGate/Technical-Tip-How-to-configure-Microsoft-Entra-ID-SAML/ta-p/307457However,
when connecting to t...
Hello all,I have a problem, probably in connection with my Fortigate100F
to establish a RadSec TLS 1.3 connection from a UniFi AC Pro AP to an
external RadSec Server (RADIUS). The connection is made via a Ubiquiti
UniFi AC Pro AP and Ubiquiti UniFi A...
Hello @MZBZ I have set the NAT traversal on the Fortigate side from
"Enabled" to “Forced”.On the FortiClientVPN side, the value for
Encapsulation is already set to “Auto”.Unfortunately no success. :\I
could imagine that this is possibly because the G...
@sjoshi So now I have finally managed it, now I also get incoming
traffic and the log now also shows “nat: peer” for the Windows
connectionbut, this now works if I change “Encapsulation” from “IKE UDP
Port” to “Auto (UDP fallback TCP)” in the “Expert...
@sjoshi Now I was able to establish a connection on the Windows 10 Non
Domain computer, it was the preshared key, I had mistyped. :(But here is
exactly the same problem. The tunnel is established, but no incoming
traffic.I have now executed the follo...
@sjoshi I've also tried with the new version of FortiClientVPN
7.4.2.1737 but it's the same behavior.Could you confirm that these
issues are not related to my Fortigate Firmware v7.6.1 build3457 ?
But what I can see is in the gui_1_error.log[2024-12-12 15:30:09.8651563
UTC+02:00] [1428:1740] [guimessenger 238 error] failed to open shared
memory. GLE=2 [2024-12-12 15:30:12.4077014 UTC+02:00] [1428:1740]
[guimessenger 238 error] failed to open s...
