Description This article explains how to restrict an admin user to a
single active admin session. Scope FortiOS, FortiGate. Solution To
disable concurrent admin logins, execute the following commands in the
CLI: config system global set admin-concurr...
Description This article explains how to troubleshoot and resolve
internet connectivity issues that arise when using the Windows native
client for L2TP over IPsec VPN with FortiGate. Scope FortiOS, FortiGate,
Windows Native Client Solution This confi...
Description This article describes how to block a specific device from
accessing all websites except a predefined set of allowed websites. The
solution ensures other devices in the same subnet continue to have
unrestricted access to all websites. Sco...
Description This article addresses the common error message encountered
when attempting to log in to the FortiGate GUI: 'This system is
temporarily in maintenance mode and should be available again shortly.
(0% complete).' Scope FortiGate. Solution I...
Description This article describes why the logs on FortiGate may show a
different time compared to the logs displayed on FortiGate Cloud. The
time zone settings on FortiGate are configured locally, and these
settings determine the timestamp reflected...
Hello @matchelo You have 3 options: 1. Generate a Certificate from
Windows Server: You can generate and export a CA certificate from your
Windows Server and import it into the FortiGate for SSL VPN
authentication. 2. Use the Built-in Certificate of F...
@ehenvironments Here are the resources that might help you troubleshoot
the issue: >>>
https://community.fortinet.com/t5/Support-Forum/ERR-SSL-PROTOCOL-ERROR-on-Google-Chrome/m-p/95529?m=182747
>>>
https://community.fortinet.com/t5/Support-Forum/ERR-...
Thank you for responding @ctyctyctctcty, Could you check how the
destination is responding configured in the Performance SLA? How SD-WAN
is configured and what are the priorities. The Phase 1 setup seems
stable, but Phase 2 is where the problem arise...
Hello @ctyctyctctcty Try running a sniffer on the source and destination
side to see where the loss is occurring.dia sniffer packet "host x.x.x.x
and icmp" 4 0 l Try using the above command, where x.x.x.x is the source
IP address that you have on per...
@Aadar-Soomro Here is an article to initially troubleshoot the
issue:https://community.fortinet.com/t5/FortiGate/Technical-Tip-VOIP-calls-using-SIP/ta-p/193831
The above article has a list of further articles at the bottom to
further investigate the ...
