Re: Invalid secret RADIUS Fortigate/fortiauthentic...

vbandha · 12-01-2024

Description This article describes why an interface may not be showing in FortiLink. Scope FortiGate v7.0+ Solution To add an interface to FortiGate, the interface should not have an IP configured and no reference on it. If that is configured and the...

vbandha · 11-27-2024

Description This article describes possible causes for the FortiGate Serial Number not showing under the Product list. Scope FortiOS 6.4+. Solution In the Support portal, all of the active FortiGates should be visible under ‘Product List’. If a certa...

vbandha · 11-11-2024

Description This article describes a symptom that may appear when troubleshooting device connectivity where the ping time is seen to be 0.1 ms. Scope FortiGate v6.4+. Solution Ping is an important tool used to troubleshoot device connectivity issues....

vbandha · 09-08-2024

Description This article describes how to assign static IP to dialup IP Sec VPN user Scope FortiGate v6.4+. Solution In the Dialup IP Sec VPN, there is no option available for IP reservation or to assign static IP. To achieve this, create a separate ...

vbandha · 09-08-2024

Description This article describes how to secure GUI admin login to FortiGate by using the Loopback interface to provide additional security. Scope FortiGate v6.4+. Solution Create a loopback interface by navigating to Network -> Interfaces, select '...

vbandha · 01-30-2025

Hi @52000cc The NPU offloading does not happen in VM fortigate. Usually the issue is the speed between the two WAN links being slower than expected. You can test for this by doing Iperf test between WAN links of the two sides: https://community.forti...

vbandha · 01-15-2025

Hello @IronMan You can also setup IPv4 DOS policy to protect against DOS attacks to your network: https://community.fortinet.com/t5/FortiGate/Technical-Tip-How-to-configure-IPv4-DOS-policy/ta-p/189653 Regards, Varun

vbandha · 01-11-2025

Hello @52000cc , You can try disabling NPU offload:https://community.fortinet.com/t5/FortiGate/Technical-Tip-Ensuring-IPSec-traffic-is-offloaded-for-improved/ta-p/193493 Also check these articles: https://community.fortinet.com/t5/FortiGate/Troublesh...

vbandha · 01-11-2025

You have to enable the option in cli for it to show in gui https://docs.fortinet.com/document/fortigate/7.6.1/cli-reference/285848147/config-webfilter-profile config webfilter profile edit set feature-set [flow|proxy] end

vbandha · 01-11-2025

Hello @tedew It seems to be fortigate blocking it. Try to create seperate policy with destination as Outlook And Microsoft ISDB and place it above main policy. Disable web filter on this policy. Or else you can try adding microsoft wildcard url in ex...

User Statistics

User Activity

Troubleshooting Tip: Impossible to add interface to FortiLink

Troubleshooting Tip: FortiGate Serial number not showing under Product list in Support portal

Troubleshooting Tip: Device connectivity issue with ping time at 0.1 ms

Troubleshooting Tip: Assign Static IP to Dialup IPSec VPN user

Troubleshooting Tip: Use Loopback interface to secure GUI admin login to FortiGate

Re: ipsec VPN issue

Re: New FortiGate Setup - Creating Firewall Policies

Re: ipsec VPN issue

Re: Fortigate 7.6.1 policy with timer and passwort release

Re: DNS Filter profile and local AD DNS Server question

Re: Invalid secret RADIUS Fortigate/fortiauthentic...

Re: Invalid secret RADIUS Fortigate/fortiauthentic...

Technical Tip: BGP Community list matching for AS ...

Re: ipsec VPN issue

Re: New FortiGate Setup - Creating Firewall Polici...

Re: Fortigate 7.6.1 policy with timer and passwort...

Re: RADIUS attribute: Message-Authenticator

Re: Network Configuration Help

Re: IPsec site-to-site problem

Re: remote user access to second vpn site to site

KCS

User Statistics

User Activity

You are leaving our website