Description This article describes how to resolve an issue where the
user is not able to access a secondary FortiGate GUI interface and
receiving the 'reverse path check fail drop' error in debugs. Scope
FortiGate. Solution If FortiGate is in the HA ...
Description This article describes a solution for users who are unable
to connect to the SSL VPN due to PKI authentication failure. If users
are unable to authenticate with PKI authentication and observe
certificate check error failed in debugs. Scop...
Description This article describes the case when VLAN pooling option is
greyed out on SSID due to the warning 'VLAN Pooling is unavailable when
Dynamic-VLAN option is enabled'. Scope FortiGate. Solution If Dynamic
VLAN assignment is enabled, VLAN poo...
Description This article describes how to check AS path information sent
by the firewall to the BGP neighbor in Wireshark. Scope FortiGate.
Solution FortiGate sends AS PATH to the BGP neighbor. Sometimes firewall
does not represent the accurate AS PA...
Description This article describes the impact of Changing the MTU value
of an aggregate interface. Scope FortiGate. Solution If there are two or
three interfaces are part of the aggregate interface, so changing the
MTU value of the aggregate interfac...
Hello , Please check the compatibility tool between Fortigate and
Fortimanager . They seems to be non-compatible version. Kindly try to
make the version compatible to each other and see that helps. Please use
the link to check the compatibility betwe...
Hello Umesh, You can check the application profile logs to see if that
application is getting block by the firewall or not. If the logs are
present in security profile logs , try to find which signature it is
blocking and try to allow that signature ...
Hi, You also have to check ,if the destination route is printed in the
routeprint output on the device connected to the vpn . If Routes are not
present in the routeprint output then might be split tunneling is
enabled and you might need to add the de...
Once you configured the Static URL filter to block , To verify the URL
has been unblocked or not you would need to test in incognito window
instead of regular window of the browser . Or you can go to the
fortigate logs and report---> webfilter--->fil...
