Description This article describes the configuration of SSO admin access
to FIPS-CC Certified FortiGate using FortiAuthenticator as IDP. Scope
All FortiOS and FortiAuthenticator versions Including FIPS certified
FortiOS versions. Solution All the IP ...
Description This article describes how to resolve an issue where users
are not able to add Fortinet Devices to 'Decommissioned Units' in the
Fortinet support portal. Scope All supported Fortinet Devices, all
supported Firmware versions. Solution The ...
Description This article describes how to add the management interface
to the FortiGate Policy. This is mainly used for routing when
devices/servers are behind the MGMT interface and users cannot create a
policy to reach those servers. Scope FotiGate...
Description Some users are unable to restore configuration on FortiGate
and get the error, 'unable to restore due to error Cannot store config
due to short of flash space!'. This article describes how to clear short
of flash space in FortiGate Disk p...
Description This article describes the commands to backup logs from
FortiGate using CLI which are stored on disk. By default, if the logs
are backed up to the FTP server, logs will be encrypted. execute backup
disk alllogs ftp execute backup disk
...
Hello bkarankar,Does it work if you remove the UTMs from the Fortigate
Policy?I would check the Application control Logs and see which
Application is blocking these extensions. Mostly it will be in Proxy. If
you do not find the signatures then you ca...
Hello Liza1, Kindly follow these articles for Traffic
shoppers:https://docs.fortinet.com/document/fortigate/5.4.0/cookbook/107907/limiting-bandwidth-with-traffic-shapinghttps://community.fortinet.com/t5/FortiGate/Technical-Tip-How-to-apply-traffic-sh...
Hello @oneil1987,KIndly use this article for the redundant internet.
https://community.fortinet.com/t5/FortiGate/Technical-Tip-Redundant-Internet-connection-without-load/ta-p/197694In
this article, Port 1 is considered dark fiber and Port 2 is consid...
Hello @mrflow1 To download a log file: Go to Log View > Logs > Log
Browse and select the log file that you want to download. In the
toolbar, click Download. In the Download Log File(s) dialog, configure
download options: In the Log file format dropdo...
