Description This article describes how to set up an event handler
triggered by a specific size of sent or received bytes. Scope
FortiAnalyzer. Solution In FortiAnalyzer, go to Incidents & Events ->
Event Handlers -> Basic Handlers -> Create New. Conf...
Description This article describes how to view the TCL script results.
Scope FortiManager. Solution The TCL scripts can be enabled on
FortiManager with the following CLI setting: config system admin setting
set show_tcl_script {enable | disable - def...
Description This article outlines the minimum requirements,
configuration steps, and recommendations for setting up FortiAnalyzer.
It also provides links to resources that will assist and guide you
through the initial configuration process. Scope For...
Description This article describes how to reinstall the firmware of a
hardware device. Scope FortiAnalyzer, FortiManager. Solution Using a
console cable to the FortiAnalyzer / FortiManager and proper software
will provide access to the hardware devic...
Description This article explains how to search for and preview the
hostname or FQDN in LogView. Scope FortiAnalyzer. Solution When
reviewing the hostname/FQDN, the FortiGate or FortiAnalyzer should
resolve them. To enable the proper settings, see th...
Hi @DennisInfra , Please make the following setting under the CLI:
config fmupdate fds-settingset fortiguard-anycast enableend Please
assure that there is no restriction to the following sites at port 443:
https://docs.fortinet.com/document/fortimana...
Hi @boneyard , Try the following
change:https://docs.fortinet.com/document/fortianalyzer/7.6.2/cli-reference/368019/system-globalsearch-all-adoms
: disable (default)Best,
