Hi all, i'm just configured a brand new HA between two Forti 200 f
FortiOS 7.0.13,but impossible to synchronize due to error message in
attach. Any clue on what it could be? TIS, MG
HI all,as per diagram,the three sites are configured with BGP and all is
working properly.All the networks are received trough BGP from both FGTs
and from Cisco R1.Now the problem is when i configure Vlan in FGT.As per
diagram,vlans configured trough...
Hi Debbie,thanks for your reply.Any trace with destination PC4 stops at
his BGP gateway and same for PC4 to other sites. Weird thing is that
only happens when i configure vlans on FGT,if i i connect PC4 straight
to port 4,works with no issues.I'm mis...
HI Muhammad,thanks again for your reply.SITE-C FGT is configured
correctly,e.g. SITE-C FGT port 3 has no vlan configured and his network
172.3.1.1/24 can be reached by other 2 sites.The problem is when i
configured a FGT port with Vlan ,for this i do...