About ahernandez_FTNT

ahernandez_FTNT · 01-04-2017

DescriptionThis article explains how to force specific traffic to be handled by one FortiGate worker when it is managed by FortiController. With these parameters the traffic that matches with the configured criteria will be always sent to the slot de...

ahernandez_FTNT · 12-05-2016

DescriptionThis article explains how to record a new auto attendant in a D-Series FortiVoice and how to backup, restore or delete an existing one.SolutionRecord a new auto attendant:1) Go to Call Features -> Normal 0 false false false EN-US X-NONE X-...

ahernandez_FTNT · 11-06-2016

DescriptionThis article describes how to configure Multi-location between an enterprise unit and a series D (SMB) FortiVoice. There are special considerations the administrator needs to be aware of at the moment to deploy this solution.SolutionSeries...

ahernandez_FTNT · 09-23-2016

DescriptionUsually different part numbers in the same model of unit implies internal changes, including hard disk. This does not necessary means the HA can not be established properly between units with different P/N.Cluster can be formed properly be...

ahernandez_FTNT · 08-01-2016

DescriptionWhen installing a new FF-65B Bluetooth module on a FortiFone 460i or FortiFone 560i, it is very common to notice that the module is not being detected by the FortiFone even when it seems to be properly installed and the module's led has be...

User Statistics

User Activity

Technical Tip: Forcing traffic to be handled by a specific worker on a FortiController

Technical Tip: Record, Delete, Backup and Restore FortiVoice Auto Attendant (D-Series)

Techincal Note: Multi location between Enterprise and Series D (SMB) FortiVoice units

Technical Note: HA Cluster members with different part numbers

Technical Note: Enabling Bluetooth module FF-65B to work on FortiFones 460i/560i

Fortinet Training Institute

KCS