Description This article describes how to fix the EMS error
(-1@_get_capabilities:471). Scope FortiGate v7.0.x. Solution When an EMS
server is added to the FortiGate settings, the EMS needs to authorize
the FortiGate before they can communicate prope...
Description This article describes how to enable Explicit Proxy on
FortiGatewith different versions of FortiOS Scope FortiGate. Solution
For FortiGate v7.0.x and previous: Go to System -> Feature Visibility,
enable Explicit Proxy, and select 'Apply'....
Description This article describes how to deploy a SD-WAN Zone and
properly set up the routing to have one PPPoE interface and one
interface configured with static IP to be part of the SD-WAN Zone and
have both active at the same time. Scope FortiOS....
Description This article describes one of the possible reasons why the
certificate chain seems broken even if the root certificate is
installed. If the System -> Certificate configuration page is checked,
root and local certificates are installed. bu...
Description This article describes that FortiGate keeps showing the
message 'Requires FortiAnalyzer Cloud entitlement'. Scope FortiGate
v6.4.4 and higher. Solution Make sure to have the FortiAnalyzer Cloud
license activated on the FortiCloud portal; ...
Hi Vishal1As you can see at the article bellow, Primary and Secondary
will be in sync. All changes to the FortiManager database are saved on
the primary unit, and then these changes are synchronized to the backup
units. Synchronizing the FortiManager...
Hi unknown1020 Have you tried to enable the fortiview history via CLI?
These are the commands: config report setting set fortiview enableend
Regards DPadula
Hi Velosy,If you want to load the whole configuration file you must load
it via menu. Top right, click in admin >> Configuration >> Restore. Then
FGT will take care and create everything for you. But if you want to
load part of the configuration as y...