Description The article describes the changes in the external threat
list resource entry limits from v7.4.4. Scope FortiGate v7.4.4+.
Solution Before v7.4.4, the limit for each external resource is 10MB or
128K entries. From v7.4.4, External resource...
Description This article provides instructions on how to use the
lz4_reader-2.0 tool to convert log files saved on FortiOS in the LZ4
format into a readable format. Scope FortiGate, Linux, Windows Solution
FortiGate log files are compressed using the...
Description This article describes how to configure the FortiGate to
send local logs to a FTP server. Scope FortiGate. Solution The 'set
upload enable' command is used to activate the log export feature and
provides several options to control the beh...
Description This article describes the cause and resolution for the
error 'Cannot reassign primary private IP addresses' seen in the OCID
debug output during Oracle Cloud Infrastructure (OCI) FortiGate HA
failover. Scope FortiGate, OCI Solution In OC...
Description The article describes how to export the filtered packets in
the Wireshark to a new file. Sometimes, Wireshark files can have many
packets that are not of interest and filters are applied to display the
packets required for troubleshooting...
Hello, If I understand correctly, you want to use both SAML and cert
based auth for separate SSL VPN users. You can map different portals to
the authentication rule under SSL VPN settings. Portal_1 : SAML Portal_2
: cert based Thanks Please upvote an...
Hello, The network ID is a Fortinet-proprietary attribute that is used
to select the correct phase 1 between IPsec peers, so that multiple
IKEv2 tunnels can be established between the same local/remote gateway
pairs. So it may not be available in Cis...