Description This article describes why the error 'Authentication type
mismatched' is seen on FortiGate OSPF debug and Cisco when establishing
OSPF adjacency between FortiGate and Cisco. Scope FortiGate. Solution If
authentication is enabled in OSPF a...
Description This article describes how to handle connections that are
down/flapping between FortiGate and MCLAG FortiSwitches after upgrading
the switches. Scope FortiGate, FortiSwitches. Solution When FortiGate
and FortiSwitches are connected and se...
Description This article describes how to resolve intermittent
disconnection of the LTE modem on FottiGate-3G4G devices with Sierra
Modem. Especially with Sierra modem EM75xx. Scope FortiGate-3G4G 40F,
60F, 70F. Solution In the crash log, the WWAN in...
Description This article describes how to block mDNS traffic with
firewall policies for a specific subnet or SSID user profile. This is
useful when users still want to allow mDNS at a global level but only
want to block mDNS for some specific subnet/...
Description This article describes the configuration scenario of
multiple Syslog servers in the FortiGate and cloud FortiGate VM when the
source IP cannot be defined as falling over to a secondary FortiGate VM
with a different interface IP. Scope For...
Hi Omkam, - To view data in Fortiview, disable auto-ASIC-offload, which
is enabled by default. -
https://community.fortinet.com/t5/FortiGate/Troubleshooting-Tip-FortiGate-Logs-are-not-displayed-in/ta-p/194193
Hi, I think you are missing a policy. This Kb might help.
https://community.fortinet.com/t5/FortiGate/Technical-Tip-Dialup-IPsec-traffic-forwarding-to-site-to-site/ta-p/192062
Routing behaviour can be changed by modifying priority and distance. You
can follow the KB below to understand the behaviour
https://community.fortinet.com/t5/FortiGate/Technical-Note-Routing-behavior-depending-on-distance-and/ta-p/198221