Sidenote hint: When you create a Tunnel Mode SSID the Subnet is created
automatically.You are not longer able to delete the Tunnel-Mode SSID via
the Wireless-Controller Section.You have to delete this SSID (Interface)
from the Networks Interfaces sec...
Update from my side. WPA3 Enterprise (PMF mandatory) also shows the
issue.So JensG seems to be on Point with the PMF.But it seems to be
happening on WPA3, WPA3 Transition and WPA3 Enterprise.Makes sense,
because these are all using PMF (Mandatory or ...
Quick update... Same Apple Devices, same Radio/VAP config except using
WPA3 Enterprise (local Raius / FGT User ) work fine.... So there´s a
flaw in the WPA3 SAE/SAE Transition on the FortiAP 231F (7.0.2)
Hi Jens, Roaming/Handoff works fine here with: config
wireless-controller vap edit „WIFI“ set ssid „SSID“ set security
wpa3-sae-transition set pmf optional set mbo enable set voice-enterprise
enable set neighbor-report-dual-band enable set fast-bss-t...
Same here, often when the Apple Device roams, the TX Rate on the FGT (AP
to Device) drops to 6 Mbit, which is not a ax Rate (SSID configured to
ax/ac only WPA3). FAP231F on 7.0.2. Ticket with FTNT is open.
