Description This article describes how to configure a local-in policy to
allow only specific subnets to access the FortiGate using the
srcaddr-negate enable option. Scope FortiGate. Solution The local-in
policy is being applied to filter or deny loca...
Description This article describes an issue where the HUB option is
greyed out when creating an ADVPN setup using IPSec Wizard. Scope
FortiOS. Solution This is due to a Spoke configuration that is still
present on the IPSec VPN configuration of the F...
Description This article provides a workaround for an ongoing issue on
the FortiGate-80F-DSL installing /8 connected route. Scope
FortiGate-80F-DSL Solution An issue occurred on FortiGate-80F-DSL tested
with v7.0.15, v7.2.9, v7.4.4, and v7.6.0 where ...
Description This article explains an issue with ADVPN with BGP as a
routing protocol when redistributing connected routes is enabled. Scope
An issue with some of the BGP neighbors will not going to establish or
stay on the Active status when redistri...
Description This article describes why a certificate warning 'A secure
connection with this site cannot verified. The certificate viewing does
not match the name of the site trying to view' appears when connecting
to SSL VPN using FortiClient and how...
The subinterfaces of the FortiGate is treated as an individual
interfaces of FortiGate, It means that you need to create a Firewall
policy on each subinterface to be able to allow the traffic to the
internet. You can have 3 options to do that. 1st op...
