Technical Tip: How to enable STUN protocol in poli...

nnair · 01-12-2024

Description This article provides the information that for the read-only users, there are limitations to enable the number of bandwidth monitoring interfaces. In the read-only users, there is a limit of 2. Scope FortiGate. Solution Create the read-on...

nnair · 09-14-2023

Description This article describes the possible reason why it is not possible to log in to the device with Forti Hardtoken because of the time/NTP issue. Scope FortiGate. Solution The Authentication failure error has been visible while logging into t...

nnair · 07-31-2023

Description This article describes how to enable the audit log via CLI. Scope FortiGate 7.0.x. Solution Below are the steps to enable the audit log on the CLI: config system global set cli-audit-log enable end To test if the audit logs are working, t...

nnair · 04-27-2023

Description This article describes how to enable STUN protocol in a policy. Scope All versions of FortiGate.Fortigate must be in Profile-Based Mode (with or without Central SNAT enabled). Solution By default, the STUN option is hidden in policies.To ...

nnair · 03-30-2023

Description This article explains how to find the IPv4 policy id for troubleshooting. Scope FortiGate. Solution Navigate to Policy and Objects -> Firewall Policy. Select the gear icon and select 'ID' as shown below. A new column 'ID' will show up on ...

nnair · 10-10-2023

You can try to delete the logs and then upgrade it,execute log delete-allIf the above doesnot work, then flash format the device and upload 5.6.13 firmware and then the configuration and then upgrade it. If still not working, then you can open a tick...

nnair · 10-10-2023

You may check the below link:https://www.fortiguard.com/encyclopedia/ips/100663396

nnair · 10-10-2023

You may also check the below links:https://community.fortinet.com/t5/FortiGate/Technical-Tip-FortiGuard-is-not-reachable-via-Anycast-default/ta-p/190041https://community.fortinet.com/t5/FortiGate/Technical-Tip-FortiGuard-Services-are-Unreachable/ta-p...

nnair · 08-29-2023

Dear Customer,May I know on which device you are trying to remove the software inventory ?

nnair · 08-29-2023

Dear Customer, Kindly follow the below link:https://community.fortinet.com/t5/FortiGate/Technical-Tip-LACP-support-for-entry-level-E-series/ta-p/193714https://docs.fortinet.com/document/fortigate/6.2.0/new-features/226063/lacp-support-on-entry-level-...

User Statistics

User Activity

Technical Tip: Limitation for the read only users

Troubleshooting Tip: Unable to login to fortigate with Hardtoken

Technical Tip: Enable audit log via CLI

Technical Tip: How to enable STUN protocol in policy

Technical Tip: How to find policy ID

Re: Upgrades FW Fortigate 30D and 30E from 5.6.13 to 6.x.x

Re: Get count of half open tcp sessions

Re: Unable to connect to fortiguard servers

Re: Remove hosts and software from Inventory

Re: Fortigate 201F : set up 2 port-channel (etherchannel level 2) on same Vlan

Technical Tip: How to enable STUN protocol in poli...

Re: Get count of half open tcp sessions

Re: Script for dis/enabling wwan interface

Re: Fortiauthenticator load balancing setup

Technical Tip: How to find policy ID

KCS