Troubleshooting Tip: FortiProxy CPU and Memory com...

otsaggos · 01-31-2024

Description This article describes the basic steps for checking CPU and Memory usage for troubleshooting. Scope FortiProxy 7.0, FortiProxy 7.2. Solution Below are listed the basic information commands concerning the CPU and Memory status of FortiProx...

otsaggos · 05-29-2023

Description This article describes possible issues in the registration of a permanent test license when the registration process stuck and prompts the error: Forticare response error 600 Failed to download VM license Scope Version 7.0.x, 7.2.x, and 7...

otsaggos · 01-31-2023

Description This article describes the basic steps for synchronizing FortiProxy when it shows un-sync. Scope FortiProxy 7.x. Solution On Master and Slave to change from master to slave unit enter slave ID 1 or 0). # execute ha synchronize start <- w...

otsaggos · 12-30-2022

Description This article provides troubleshooting commands for possible traffic shaper issues. Scope FortiGate 6.0, 6.2, 6.4, 7.0 Solution Check ethernet statistics To optimize traffic shaping performance, run the following command: diagnose hardware...

otsaggos · 11-27-2022

Description This article describes the issue when a VM installation shows 'License Status: Invalid Copy'. Scope FortiOS 5.x, 6.x and 7.x. Solution When in the output of the command 'get system status' the License Status shows 'Invalid Copy', check on...

User Statistics

User Activity

Troubleshooting Tip: FortiProxy CPU and Memory commands

Technical Tip: Register issue in a permanent test license : License Status: Invalid

Troubleshooting Tip: FortiProxy HA synchronization

Troubleshooting Tip: Troubleshooting traffic shaping

Technical Tip: VM shows 'License status: Invalid Copy'

Troubleshooting Tip: FortiProxy CPU and Memory com...

KCS