Description This article describes how to create redundancy with IPsec
and MPLS links. Scope All FortiGate versions. Solution This is regarding
the scenario where the users are looking to create remote connectivity
primarily with the MPLS link and se...
Description This article describes how to add the MAC addresses to the
exempt list of the captive portal. Scope FortiOS 6.0+. Solution It is
always possible to exempt some or the other user/IP to be exempted from
the captive portal page. Follow the b...
Description This article describes when users will see the AD connector
showing down. Scope All FortiOS versions. Solution Sometimes the AD
connector is showing down under external connectors. Make sure to check
all these things before investigating ...
Description This article describes how routing works in FortiGate
firewall. Scope Fortios 5.6 and above. Solution There are several ways
to configure routing in FortiGate: Policy route. ISDB route. SD-WAN
route. Static route. Dynamic route (BGP, OSPF...
Description This article describes how to use of FSSO agent with Open
LDAP. Scope FortiOS. Solution FSSO agent, agent or agentless mode does
not support Open LDAP. Since it is designed to support the event IDs of
Windows. However, it is possible to a...
Hi As mentioned, you can not go to 6.4.8 in your 100D device You will
probably have to upgrade hardware to 100E/F for this version. The
maximum you can upgrade is to 6.2.10