Description This article describes the Dial-up IPSec connection between
1 FortiGate Hub and multiple FortiGate dial-in clients using IKEv2 and
pre-shared key authentication when there are more than 1 Dial-up phase1
at the Hub and the correct tunnel m...
Description This article describes how to configure the FortiGate as an
IGMP querier on a FortiSwitch-managed topology. Similar steps can be
followed when configuring an IGMP querier on a physical interface
without having a Managed FortiSwitch involv...
Description This article provides some technical specs on the
'Self-Loopback' cable mentioned in HQIP hardware tests.The details below
should help to use the proper cable. Scope FortiGate. Solution The
Self-loopback cable is a special wired cable whe...
Description This article describes how to disable the device
database/device detection completely on the FortiGate. Going to the
interface settings and disabling 'Device detection' is not enough in
some cases where devices might still be populated fr...
Description This article describes how to properly identify the
following behavior and resolve this issue permanently. FortiGate-VM
deployed in the Hyper-V platform may get into an unresponsive state
where multiple services are impacted: GUI manageme...