Description This article addresses an issue where FortiGate presents an
error 'Can not create query, check_create_cmf_query, firewall' after the
firmware upgrade to v7.4.3 or higher. Scope FortiGate. Solution Before
upgrading to v7.4.3 or higher and ...
Description This article describes an issue where IPSec VPN Tunnel
Interface Tx/Rx error counters increment on FortiGate after the firmware
upgrade to v7.0.14/v7.2.5 and above. Scope FortiGate. Solution At
certain IPSec VPN bandwidth usage and concur...
Description This article describes an issue where network or Internet
access may be disrupted for the end user when a traffic shaping policy
is enabled on NP7lite devices such as the FortiGate-90G/91G. Scope
FortiGate. Solution On v7.2.10 and earlier...
Description This article outlines the important changes to the Traffic
Shaping implementation on FortiGate with NP7 Queuing-Based Traffic
Management (QTM) Module. Scope FortiGate. Solution Starting from
v7.2.11, v7.4.7 and v7.6.1 The QTM module on NP...
Description This article describes the purpose of the various open TCP
sockets that FortiGate listens on, as shown in the output of the
diagnose sys tcpsock command, and determines whether FortiGate responds
to traffic directed to those listening por...
Please check if the logs are displayed from
CLIhttps://kb.fortinet.com/kb/documentLink.do?externalID=FD40417Also,
you can generate test logs using the command #diagnose log test to
verify if the logs are really generated and saved into Disk/Memory.
