Description This article provides the command to check the SoC
temperature and the CPU states in FortiExtender. Scope FortiExtender.
Solution 'get system performance status' is the real-time CLI command on
the FortiExtender to check the SoC temperatu...
Description This article describes which command can be used to check
the drops/packet loss on the interfaces of the FortiExtender. Scope
FortiExtender, Troubleshooting Solution Following commands will be
helpful when troubleshooting for packet loss ...
Description This article provides commands that need to be collected
from the FortiExtender Command Line Interface to provide more
information for the Technical support team when creating a new ticket.
Scope FortiExtender. Solution Login to the Forti...
Description This article describes how to troubleshoot when the modem
status on the FortiExtender shows as 'Resetting or Not inserted'. Scope
FortiExtender. Solution Power off the FortiExtender for at least 3 to 5
mins and then power on the device: U...
Description This article provides the command in the FortiWireless
Controller, which can be used to Enable/Disable the WebCLI option. Scope
AP, FortiWLC, Wireless Troubleshooting. Solution WebCLI is the Command
Line interface window which can be open...
Hi, -- Please make sure that the AP is able to ping the Fortigate Ip
address and vice versa. this is to confirm the communication is working
between the 2 x devices. -- If the AP and Fortigate are in different
subnet then UDP ports 5246 & 5247 has to...
