Most Liked Posts Recent Solutions
No Content Available

User Activity

Description This article describes the use of BGP 'set distance-local' settings. Scope FortiGate. Solution Diagram: set-distance-local: This command can be used for routes that are configured under ‘configured network’ for the BGP config ‘config rout...
Description This article describes the issues faced while upgrading the firmware of an HA Cluster. Scope FortiGate. Solution How to verify that the secondary device in the HA cluster receives the image from the primary during the firmware upgrade. Th...
Description This article describes how to prevent OSPF peering with a secondary IP address on the Interface. Scope FortiGate. Solution The following configuration applies to this topology: FortiGate (port9 20.0.0.2) <---> FortiGate 2 (20.0.0.1 & 20.0...
Description This article discusses the configured policy route types in the policy route table. Scope FortiGate. Solution There are 3 types of policy routes displayed in the Policy Route Table (Regular policy route, ISDB route, and SD-WAN rules). dia...
Description This article describes how the 'set interface' and 'set update-source' BGP commands operate on a FortiGate device. Scope Any supported version of FortiGate. Solution Using set interface : config router bgp set as 65412 set router-id 1.1.1...
My Accepted Solutions