ssudhakar
Staff
Staff
‎04-25-2024
Last activity: Apr 25, 2024 9:56:35 PM
80 Profile 80% Complete
Most Liked Posts Recent Solutions
No Content Available

User Activity

Description On v7.2, When 'execute factoryreset' is performed on MBD/FIM the default image used for FPC/FPM sync will be removed until a new image is manually updated either via the GUI or via the CLI. Uploading a new image via the GUI will reboot th...
Description This article outlines a method for identifying the device causing fragmentation through a ping test. However, this approach may not always be possible, especially when access to all devices along the network path is limited. Scope All sup...
Description This article describes how to troubleshoot if the blades on the chassis are stuck at 'Waiting for data heartbeat' status in a HA cluster. Scope FortiGate 6000/7000 series , v5.6, v6.0,v6.2,v6.4. Solution From ' diag load-balance status', ...
Description This article describes the changes in the IPSec load-balance setting from v6.2.6/6.4.6 onwards. IPSec load-balancing is enabled on FortiGate 6000 series and disabled on FortiGate 7000 series by default until v6.2.4/v6.4.2 and this config ...
DescriptionThis article describes the changes in the inspection mode In policies and UTM profiles from version 6.0 to 6.2.SolutionIn 6.0 version.- The inspection mode is set per VDOM.- UTM profiles can be set in flow or proxy mode.- When applying the...
My Accepted Solutions
Kudos given to