Description This article discusses the maximum number of OSPF neighbors
allowed in FortiOS. Solution The limit of a maximum number of 10 per
VDOM, which is as stated in the Maximum Value table for version 4.3,
5.0.x, 5.2.x is restricted only to the s...
Description This article describes that in FortiGate, to set status
disable under ospf-interface will only prevent the parameters defined
here for the OSPF interface from being used. It will not disable an OSPF
interface and bring down the OSPF. Solu...
Description In FortiOS v5.2.x and 5.0.x, policy based IPSec is disabled
only in GUI by default. It can be configured in CLI or by using the
Enable feature in the GUI. Once enabled, IPSec tunnels can be used in
the Firewall Policy. Solution To enable ...
Description In FortiOS 4.3.x, the CAPWAP was enabled by default on all
physical and VLAN interfaces. In most cases a FortiAP is only connected
to the internal interfaces to create a private WiFI network inside the
network.However, this can be a poten...
Description In FortiOS v5.2.x, when any of the UTM/Security profiles
(Antivirus, Webfilter etc) are enabled, automatically the ssl inspection
is also enabled by default. Solution This feature can only be disabled
via the CLI (enabled by default):conf...
