Technical Tip: Configure SCP backup

nmerchant · 08-16-2020

Description This article explains how to configure SCP backup for FortiAnalyzer/FortiManager. Scope FortiAnalyzer.Solution Check the OpenSSH version on the Linux station for version 5.4 or higher. Create a private/public key pair in the current direc...

nmerchant · 07-11-2019

DescriptionThis article describes how to detect the second hard disk on new devices.This problem is typically seen on new devices where the second hard disk is present in the unit but not visible under ‘get system storage’ command, as illustrated bel...

nmerchant · 07-11-2019

DescriptionThis article explains how to create and re-order entries in IPS profile through FortiManagerSolution1) Create an IPS profile: Add an IPS filter to monitor signatures with medium, high and critical severity and enable a Rate Based Signature...

nmerchant · 07-04-2019

DescriptionThis article describes how to create and re-order entries in IPS profile through FortiManager.Solution a) Create an IPS profile, add an IPS filter to monitor signatures with medium, high and critical severity and enable a Rate Based Signat...

nmerchant · 02-27-2019

Description This article describes when ping is allowed even though trusted hosts are configured on version 6.0 and onwards, in earlier versions it was blocked. Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTab...

User Statistics

User Activity

Technical Tip: Configure SCP backup

Troubleshooting Tip: Second Hard Disk not detected on new devices

Technical Tip: Configure and re-order IPS profile entries via FortiManager

Technical Tip: Configure and re-order IPS profile entries via FortiManager

Technical Tip: Ping is allowed when trusted hosts are configured

Technical Tip: Configure SCP backup

KCS