lestopace
Staff
Staff
‎07-06-2023
Last activity: Jul 6, 2023 4:04:24 PM
100 Profile 100% Complete
Most Liked Posts Recent Solutions
No Content Available

User Activity

Description This article describes how to configure HA failover delay when monitored interface go down. Scope FortiGate 7.0 and above. Solution In the following example, the failover-hold-time has been set to 30 seconds. The value can be set from 0 t...
Description This article explains the message about FortiGate HA enrolled in FortiCloud where the slave unit shows its management tunnel status as down. Scope FortiGate and FortiCloud. Solution Problem: This is an expected behavior. Since the slave u...
Description This article describes how to identify the direction of frames in a packet capture when using 'any' interface when running 'diagnose sniffer command'. The following scenario uses UDP an example and transparent mode FortiGate. Scope FortiG...
Description This article describes the OSPF behavior when introducing a new router that has a higher router ID and priority to the OSPF neighborship in the same broadcast domain. Scope FortiGate. Solution Problem. In the following scenario, VDOM1 and...
Description This article describes how to configure TTL security policy for BGP. Scope FortiGate. Solution Problem. Referring to the image below, even though 10.122.2.155 is not a valid eBGP neighbor, 10.1.1.1 still responded SYN-ACK packets to the S...