Description This article describes how to bind a MAC address with a
RADIUS policy in FortiAuthenticator. Scope FortiAuthenticator. Solution
Step 1: Configure MAC address and define the username. Step 2: Create a
group for the MAC device. Make sure to...
Description This article describes the possible reasons that can cause
the error where the AP of portal policy does not contain the client.
Scope FortiAuthenticator. Solution Radius debug:
2025-02-25T17:56:15.101000+05:30 FortiAuthenticator radiusd[2...
Description This article discusses errors that emerge in RADIUS logs
during certificate validation and how to address them. Scope
FortiAuthenticator. Solution Radius debug:
025-02-24T17:13:41.246883+05:30 CR-FortiAutheticator radiusd[7524]: (16)
eap_...
Description This article describes how to allow user groups to override
block categories with Web profile override. Scope FortiGate. Solution
Configure web profile administrative override under Security profiles ->
Web Profile overrides. Configure we...
Description This article describes a case where an error was obtained
when enabling OTP using SMS for imported LDAP users. In this case, the
users receive the token code however the FortiToken will not be assigned
to a user in FortiAuthenticator. Sco...
Hi lrazmadze, Yes the services are down. You can verify on changing the
port to UDP 8888 or 53. Refer on this below article:
https://community.fortinet.com/t5/FortiGate/Troubleshooting-Tip-FortiGuard-Web-Filtering-problems/ta-p/196965
Hi Ricardo, Check the admin guide for product integration and support
and verify the compatibility with Android operating systems. I have
shared the reference link for 7.4.0. You can verify the same for the
current Forticlient version.
https://docs.f...
Hi defsdefs, Check the web-filter license status. Go to Security
Profiles -> Web Filter, select the Profile to use, and under 'Rating
Options' enable 'Allow Websites When a Rating Error Occurs'. You can
refer on this article:
https://community.fortin...
Hi @DaVeiga19, You can check by adjusting the engine count and socket
size. config ips global set engine-count 2 [integer, 0-255]set
socket-size 16 or 32 [integer, 0-512]end Refer
link:https://community.fortinet.com/t5/FortiGate/Technical-Tip-IPS-mem...
Hi Business User, It seems to be an issue with Forticlient version. As
you are running free Forticlient version check with FortiClient version
6.0. Refer on this below article:
https://community.fortinet.com/t5/FortiClient/Technical-Tip-FortiClient-S...
