Technical Tip: How to configure ADVPN to be scalab...

epiquette · 02-25-2025

Description This article will explain how to verify if the WiFi client is connected wirelessly, which SSID it is connected to, and some of the connection details. Scope FortiGate v7.2.4+. Solution The most common command to use in order to verify whi...

epiquette · 01-09-2025

Description This article explains how to allow the traffic for Extreme Networks fabric to allow their adjacency to successfully establish over a Virtual Wire Pair. Scope FortiGate. Solution By default, a Virtual Wire Pair does not allow layer 2 traff...

epiquette · 08-19-2024

Description This article explaindescribes how to prevent ADVPN shortcut SLA from being considered as the preferred link in SD-WAN, such as in cases when 'Best quality' is used. Scope FortiOS 6.4.4+. Solution In an SD-WAN setup with ADVPN, there are s...

epiquette · 08-02-2024

Description This article describes how to configure an ADVPN that can scale, whether it is for multiple ISPs or multiple hub topologies using the CLI. Scope FortiOS 7.4.x FortiOS 7.2.x Solution Hub Configuration TemplateHub interface configuration co...

epiquette · 03-29-2015

Description This article describes the basic HA setup. Scope FortiGate. Solution The conditions for configuring HA are as follows: Devices must be of the same model. Devices must have the same Firmware version. The same licenses must be applied to al...

User Statistics

User Activity

Technical Tip: Verify WiFi connected clients using the CLI on FortiOS

Technical Tip: How to allow Extreme fabric through a FortiGate using a Virtual Wire Pair

Technical Tip: How to prevent ADVPN shortcut SLA from being considered in SD-WAN