Description The article describes how to configure a downstream
FortiGate to obtain the IPv6 prefix and DNS from an upstream DHCPv6
server through FortiGate GUI. Scope Solution In this scenario, a DHCPv6
server is connected to FortiGate A via an upst...
Description The article describes the steps to import address objects
and create groups using scripts. Scope Solution Configuration from GUI:
By using the bulk command option, the address objects can be imported to
a group, the same can be done under...
Description This article describes how to configure a virtual server.
Scope FortiGate.Solution From the GUI: Go to System -> Feature
Visibility and enable 'Load Balance'. Go to Policy & Objects -> Virtual
Servers and select 'Create New'.The virtual s...
DescriptionThe article describes how to configure the password policy
for locally defined administrator passwords and IPsec VPN pre-shared
keys.SolutionConfiguration from GUI.To create a system password policy
from the GUI:1) Go to System -> Settings...
For traffic logs, please cross-verfiy if the policies have log "All
sessions" enabled or not. To verify the Forward Traffic logs, "All
sessions" in the policies need to be enabled. Please also check the
below settings, you can enable the type of logs...
You can collect traffic logs and packet captures at the time of the
issue, below is the document of IPsec VPN troubleshooting:
https://community.fortinet.com/t5/FortiGate/Troubleshooting-Tip-Troubleshooting-IPsec-Site-to-Site-Tunnel/ta-p/195672
https...