About ciordan

ciordan · 03-15-2020

DescriptionWhen advertising a static route to an iBGP neighbor, the next hop information of that static route is not changed to a FortiGate IP but to the one of the next hop in the static route definition.This article describes this feature.SolutionE...

ciordan · 11-12-2019

DescriptionIf an existing device will be part of a cluster, make sure the heartbeat interface does not have sniffer mode enabled. Add the interface in the HA config is possible but that won’t be used to form a cluster.SolutionIf a port was used in a ...

ciordan · 10-22-2019

DescriptionThis articles is intended to inform that bootp relay is not supported on the FortiGate.SolutionFortiGate does not support bootp relay. It only supports DHCP relay so the firewall will drop the packets if they don’t have DHCP option 53 whic...

ciordan · 09-26-2019

Description This article describes how to configure a static route with address objects or address groups. Scope FortiGate. Solution Configure a standard address through the GUI under Policy & Objects, specifying the name, type, and subnet:GUI view: ...

User Statistics

User Activity

Technical Tip: Next hop information in BGP for redistributed static routes

Technical Tip: Cluster is not forming if heartbeat interfaces have sniffer mode enabled

Technical Tip: Bootp relay

Technical Tip: Static routes with address objects or groups

KCS