Description This article describes the changes to conserve mode self
protection mechanisms starting in version 5.6. Scope FortiGate version
5.6 and above. Solution The main differences are as follows: No more
distinction between 'kernel' versus 'Prox...
Description This article describes how Reverse Path Forwarding (RPF) is
implemented on the FortiGate.It also explains how the VDOM-specific CLI
setting 'config system settings -> set strict-src-check' modifies the
RPF behaviour.Behaviour is highlight...
Purpose This article explains how to use the online "FortiGuard Analysis
and Managed Service" (FAMS) to backup and restore a FortiGate
configuration.The FAMS service is a free service allowing storage of up
to 1 GB of data for low end units which are...
Purpose Presents pre-ips anomaly feature available on NP2 and NP4
accelerators.NP2 and NP4 are 2 types of network accelerators. They may
be either on the FortiGate board or within an interface module. Example
for NP2: on board: FortiGate310B, FortiGa...
PurposePresents the hardware accelerated SYN proxy feature available
with SP modules from CE4, XE2, XG2 cards and FortiGate
3140B.ScopeFortiGate with Service Processor (build-in or with
module)Modules: ADM-XE2, ASM-CE4, FMC-XG2FortiGate: FortiGate 31...