Re: Need to block linkedin Jobs

metz_FTNT · 09-27-2024

Description This article describes how local out traffic is handled when policy-based IPsec is configured. Scope FortiGate. Solution In FortiOS documentations, it is possible to find that self-originating traffic from the firewall (such as license va...

metz_FTNT · 09-27-2024

Description This article describes the client-comforting feature of the FortiGate. Scope FortiOS supported versions. Solution Client-comforting is designed to avoid issues with connection timeouts and file download failing while waiting for Firewall ...

metz_FTNT · 08-15-2024

Description This article describes the cause of a 'WSL failed' error while installing FortiNBI on a virtual machine. Scope FortiNBI, FortiProxy. Solution FortiNBI utilizes a WSL 'windows subsystem' that allows using a Linux environment directly on Wi...

metz_FTNT · 05-28-2024

Description This article describes how to regenerate FortiGate built-in SSH keys for PKI admin authentication. Scope FortiGate. Solution It is possible to list the current keys with the command below: fnsysctl ls -l /etc/ssh/ -rw------- 1 0 0 Tue May...

metz_FTNT · 04-30-2024

Description This article describes the maximum retransmission attempts the Fortigate TCP stack will attempt before resetting a TCP connection Scope FortiGate. Solution In TCP protocol, every stream of data sent to one side requires an ACK packet to b...

metz_FTNT · 01-13-2023

Hello, Think of the Zones like different interfaces, you can set up sd-wan zone with members port1 and port2 and set the zone as destination intf in a policy. Then you can create a specific rules for how to balance the traffic between the interface m...

metz_FTNT · 12-02-2022

Check here: https://community.fortinet.com/t5/FortiGate/Technical-Tip-Virtual-IP-VIP-port-forwarding-configuration/ta-p/198143

metz_FTNT · 12-02-2022

Hello, On the Firewall policy, make destination to be the VIP object, instead of "ALL" and it will work.

metz_FTNT · 12-02-2022

Hello, You can try with webfilter static URL. Simply create a Static URL entry to block "www.linkedin.com/jobs/ " https://community.fortinet.com/t5/FortiGate/Technical-Tip-Using-a-static-URL-filter-feature-to-allow-block/ta-p/193086 Note: You must al...

metz_FTNT · 12-02-2022

Hello, You don't get a straight answer, because there isn't. A default value which will protect all possible environments will practically have block access to internet. -AntiVirus default will protect you as overall there is not a lot to modify on i...

User Statistics

User Activity

Techinical Tip: How local out traffic is handled when policy-based IPsec is configured

Technical Tip: Using client-comfort in proxy-option profile

Troubleshooting Tip: WSL failed error during FortiNBI installation on a VM

Technical Tip: How to regenerate local SSH keys

Technical Tip: Maximum retransmission attempts

Re: What difference between SD-WAN zone and SD-WAN rules?

Re: Port forwarding not working

Re: Port forwarding not working