Description This article explains how to stop sending logs to
FortiAnalyzer in a specific VDOM context. In normal conditions, while
enabling global log configuration to send log to FortiAnalyzer
individual, VDOM is not allowed to edit/update log sett...
Description This article describes how to configure interface MTU with
jumbo frame size. Besides a normal Ethernet frame size of 1500, FortiADC
supports an Ethernet jumbo frame size of 9000. Jumbo frames are larger
MTU frame sizes, potentially reduci...
Description This article describes and demonstrates how the CLI command
'diag policy wr-state list " can be used to check how many
users are in the Waiting Room. The Waiting Room is a feature to manage
visitor traffic and avoid server overload causin...
Description HTTP request-header comes with many fields. Just to list a
few: Host, Content-Type, and Cookie. These common HTTP header fields
provide essential information to help web servers obtain helpful
information about clients. This article descr...
Description This article describes and demonstrates which command to run
to check remaining trail license expiration time. Obtaining information
about how much trial license time remains will help to organize a
timeline and tasks accordingly. Scope F...
Hello While running configFSM script on collector, you may try enter
127.0.0.1 as a testpinghost instead of any public or private domain like
google.com and check if the install gets completed successfully.
Hi May be below KB is what you need How internal users can access
internal resources via an external VIP (public IP
address):-http://kb.fortinet.com/kb/microsites/search.do?cmd=displayKC&docType=kc&externalId=FD33976
How to access natted server inter...
Hi, It would be helpful if you provide session info. Please
remove/replace any sensitive info like public IP address # diag sys
session filter dport 3389# diag sys session li
Hi, - You need to configure web server infoconfig system server-probe
edit 1 set server "X.X.X.X" set srcintf "port1" set protocol http-get
set url www.mywebserver.com next end - You can verify with below diag
command# diag sys server-probe status al...
Hi, Alert message itself "Permission Denied" is telling you it [FGT]
can't locate any "matching" authentication info you have provided.I
assume this is sslvpn web mode accessdid you check the vpn log entries
in regards to these "Permission Denied" ac...
