Technical Tip: Adding multiple DNS suffixes to SSL...

FJT_FTNT · 06-05-2020

DescriptionThe following command can be used to add multiple DNS suffixes/domains to resolve host names when connected to a SSLVPN /IPsec dial up VPN tunnel.This article describes how to use this command.SolutionThis configuration option is not avail...

FJT_FTNT · 09-18-2017

Description This article describes when IPSec Phase 1 DH group is selected 1, 2, or 14 on FortiClient Android, IPSec VPN connection cannot be established. This is a known issue. WorkaroundFortiClient Android's IPSec Phase 1 DH group default value is ...

FJT_FTNT · 08-14-2016

Description Packets are lost during phase2 rekey when using NP offloading.This article explains possible solutions to avoid packet loss. Solution In transparent mode, the FortiGate learns MAC addresses and creates the forwarding database (FDB).The pe...

FJT_FTNT · 11-27-2014

DescriptionFortiCloud indicates the following five Analysis Status values:- Pending: file has been submitted to backend virus scanning system, and is waiting for scanning.- Clean: file has been determined as a clean file.- Virus: file has been determ...

FJT_FTNT · 11-27-2014

Description This article provides a sample configuration for DNS based FortiGuard web filtering. Solution Topology or network layoutPC---(switch)FGT-111C(wan1)---InternetSteps1) Create webfilter profile### CLI sample ###config webfilter profile edit ...

User Statistics

User Activity

Technical Tip: Adding multiple DNS suffixes to SSLVPN tunnel and IPsec dial up VPN tunnel configuration

Technical Tip : IPSec Phase1 fails to connect if using any DH group other than 5 with FortiClient Android

Technical Tip: IPsec VPN FortiGate with NP offloading in Transparent mode in the same layer 2 domain

Technical Tip: FortiCloud AV Submission Analysis Status values

Technical Note: How to configure DNS based FortiGuard web filtering

Technical Tip: Adding multiple DNS suffixes to SSL...

Fortinet Training Institute

KCS