I am trying to find a way to disable daylight saving time on the active
timezone on FortiOS 7.2.7.But apparently the option presented in the
following posts is
missing!https://community.fortinet.com/t5/FortiGate/Technical-Tip-How-to-disable-daylight-...
Hi everyone! I have a simple question I have three default static routes
like this: route1: 0.0.0.0 port1[weight=3] gateway1 - admin distance:
10, priority: 0 route2: 0.0.0.0 port2[weight=4] gateway2 - admin
distance: 10, priority: 0 route3: 0.0.0.0 ...
Here' s how my scenario looks like: We had a Mikrotik RB1000 as our
network edge with two Internet connections (one through an IPIP tunnel
[2 Mbps] which was replaced by a GRE tunnel as IPIP tunnel cannot be set
on Fortigate and it supports GRE, and ...
Hi! I' m looking for a RADIUS server for accounting and authorization to
work beside my Fortigate 311B, one which works with Fortigate as Radius
client.
FG500-UP (global) # show system global | grep timeset admintimeout
480set proxy-auth-timeout 5set timezone 41FG500-UP (global) # diagnose
sys dayst-infoThe current timezone '(GMT+3:30) Tehran' daylight saving
time starts at Sun Mar 17 00:00:00 2024, ...
Hi @amuda Thanks for you response, but as far as I know, NTP
synchronization has nothing to do with the timezone changes! Tight now
the device clock is in sync but one hour ahead as it is considering the
DST changes
@ebilcariHi and thanks for your response. But the issue is that the
device has not determined the time offset correctly. DST was removed
from my timezone in the late 2022, but the firewall is still considering
time offset schedules as planned before ...
