About adash_FTNT

adash_FTNT · 10-15-2014

DescriptionThis article explains how to enable SSL Inspection from CLI and apply it on a policy.ScopeFortiGate-40C, FortiGate-20C, FortiGate-30D, FortiGate-80C, FortiGate-90D.Solution1.) Check and edit the SSL inspection profile “default” and to enab...

adash_FTNT · 06-12-2015

bandwidth can be limited in terms of how much speed(mbps/gbps) can be used by each user and not by how much mb/gb can be downloaded by each user. To limit the speed, you can use traffic shaper objects(policy and objects>object>traffic shaper>create n...

adash_FTNT · 06-12-2015

you can configure spill over as per the link below http://nullhaus.com/2014/02/fortigate-wan-load-balancing/

adash_FTNT · 06-12-2015

Step 1:-make sure the static routes for ISP 1 and ISP 2 have same distance and priority.(If you want to make sure both routes should be active at the same time) Step 2:-go to router>settings and add link health monitor for both ISP1 and ISP2 for exam...

User Statistics

User Activity

Technical Note: How to enable SSL Inspection from CLI and apply it on a policy

Re: Limit bandwidth for a VLAN

Re: How to configure fail over when first ISP is full speed

Re: Policy routing with back up ISP

KCS