Description This article explains how to maintain physical layer 2
ethernet connectivity when running in bypass mode on the FortiGate. This
article applies to the following FortiGate devices:- FortiGate 100D-rev
2 FortiGate 600C FortiGate 800C FortiG...
Description This article explains that due to hardware limitations on
certain FortiGate models only physical interfaces are available for
configuration. Due to a web-based manager limitation on the FortiGate
40C, VLAN configuration can only be config...
Purpose This article explains how to source NAT traffic using a specific
IP address for traffic entering an IPSec tunnel so that the NAT IP is
clearly identifiable by the remote site for source traffic coming from
the initiator site. Scope FortiOS al...
Description In FortiOS v4.0 MR3 the Antivirus splice option is available
for the following protocols: FTP, FTPS, SMTP, SMTPS, and NNTP. This
article explains how to configure the splice options and describes how
the functionality operates with the va...
Description If special characters are entered in the Distinguished Name
for LDAP, FortiOS will alert with the message : The following characters
are not allowed: < > ( ) # " ' ".This article provides a workaround this
restriction.Scope FortiOS v4.0 M...
