Description This article describes the configuration when both
FortiGate-VM and FortiManager-VM have no internet access (air-gap).
FGT-VM (no internet access)----FMG-VM (no internet access). Scope For
FortiGate and FortiManager-VM and hardware device...
DescriptionThis article dicusses how to import a signed Certificate from
a Third-Party vendor onto a FortiGate.Solution1) You can get a signed
Certificate from a Third-Party CA and Import it into the Local
Certificate Store in a FortiGate and apply f...
Description This article describes how to enable IPOA connection type on
ADSL on a FortiGate used over ATM. Scope FortiGate ADSL devices.
Solution This is an explanation of different connection types used for
ADSL units connection over ATM:PPPoA.The ...
Description This article explains how to connect to an IPSec VPN tunnel
from a DOS prompt. All commands must by run as the Administrator. In a
DOS prompt window, under the default installation folder of FortiClient
(C:\Program Files (x86)\Fortinet\Fo...
Hello,First to create VPN tunnels1>Create two IPSEC on HUB for each
branch2>Keep quick mode selectors on all these VPN to 0.0.0.0/0, this is
not neccessary but simplifies configuration to a great extent3>VPN
should be in interface/route modeNow to al...
Hello,Routing appears to be in place this is the route which should be
used:S 192.168.18.0/23 [10/0] is directly connected, co2-bk-m-1, [10/0]
Regardless of distance and priority for default route as this is more
specific route could you please share...
