Re: Issue with FSSO Agent Communication on seconda...

jhussain_FTNT · 08-13-2024

Description This article describes how to enable 'httpmethod' and 'referrer url' parameters in the HTTP transaction logs for FortiAnalyzer or syslog or FortiSIEM Scope ForitProxy. Solution The default HTTP transaction logs in Fortiproxy do not includ...

jhussain_FTNT · 12-01-2023

Description This article describes how to update manually a Botnet database in an air gap environment. Scope FortiGate. Solution Manually updating the Botnet database in the air gap environment has been combined with the Internet Service definition u...

jhussain_FTNT · 05-04-2023

Description This article describes how many FortiGates can be connected to one FSSO Collector agent application for login information. Scope FortiGate, FSSO. Solution The FSSO Collector agent is installed on the Windows Server. It is possible to have...

jhussain_FTNT · 04-09-2023

Description Technical Tip-Duplicate session logs are seen in the forward traffic logs for long live session packets. Scope Solution When a large file from the Internet is uploaded, it is possible to notice multiple forward logs with the same session ...

jhussain_FTNT · 06-29-2022

Description This article describes how to configure the LDAP users as the Guest account provisioning sponsors. Scope FortiGate v6.4, v7.0, v7.2., v7.4, v7.6. Solution Creating an LDAP Server. Creating a user group using the configured LDAP server. Co...

jhussain_FTNT · 01-20-2025

Hi Ganesh, The user will be logout from firewall authentication list based on the auth-timeout-type and auth-timout settings under config user setting. If the type is ideal and timeout is 5 min, the user will be logout if there no traffic received fr...

jhussain_FTNT · 01-20-2025

Hi, The Reason Unspecified reason could be Mutiple reason, and some time can be due to coverage issue. Kindly check the power settings for the AP, at the time of the reported failure could you validate if the client tried to connect to another closer...

jhussain_FTNT · 01-03-2025

Hi, Please note that remote sync rule will not sync the user manually imported by Remote Users -> Import.Kindly refer the below document. https://community.fortinet.com/t5/FortiAuthenticator/Technical-Tip-Remote-Sync-rules-will-not-sync-the-user-that...

jhussain_FTNT · 12-12-2024

Kindly verify both the collector agent IP address is added in DC02 as shown in the below image. Regards Jamal Hussain

jhussain_FTNT · 12-11-2024

Hi @mrmIT You must ensure that log events have been received by both domain controllers Also verify you are monitoring both Domain controller in the collector agent settings in DC01 /DC02. Regards Jamal Hussain

User Statistics

User Activity

Technical Tip: How to enable 'httpmethod' and 'referrer url' parameters in the HTTP transaction logs for FortiAnalyzer or syslog or FortiSIEM

Technical Tip: Manual update of Botnet database in an air gap environment

Technical Tip: How many FortiGates can be connected to one Collector agent

Technical Tip: Duplicate session logs are seen in the forward traffic logs for long live session packets

Technical Tip: Configuring LDAP users as the Guest account sponsor

Re: Captive portal time out

Re: Troubleshooting "Wireless client left WTP" Logs

Re: Forti Authenticator sync sso groups