Technical Tip: Chromecast across subnets

Andreas77_FTNT · 01-10-2020

DescriptionThis document describes what TCP port 1000 is used for and how to disable it.Some network scanners gives the information that TCP port 1000 is open.The FortiGate will listen on TCP 1000 for all configured interfaces, if authentication keep...

Andreas77_FTNT · 11-29-2019

Description This article describes how to override default route settings: administrative distance and priority, for the default route received from DHCP.A DHCP server can send a gateway address with Option 3 (Router) on a DHCP Offer message: If the ...

Andreas77_FTNT · 10-31-2019

Description This article demonstrates the deployment of OCVPN (Overlay Controller Virtual Private Network).OCVPN is meant to be really fast and easy to configure because it will automatically create: Local and remote address groups. Routes. Policies....

Andreas77_FTNT · 10-18-2019

DescriptionThis document describes how to check if traffic shaping is used on active sessions and also demonstrate which traffic shaper is taking precedence between policy based shaper or traffic shaping policy.SolutionIn this example, traffic shapin...

Andreas77_FTNT · 09-23-2019

Description This article describes how to configure FortiGate as an NTP server. Scope FortiGate.Solution FortiGate can be used as an authoritative NTP source for other clients. In this setup, 'port1' is the interface connected to the internet, and 'p...

Andreas77_FTNT · 09-05-2019

Hi, From where is this echo request packet being sent :7.084324 wan out 10.99.99.39 -> 1.1.1.1: icmp: echo request If this is from the FGT itself using ping command ?If so, this is local traffic and I'm afraid you cannot use SNAT on that.

Andreas77_FTNT · 09-05-2019

Hi ME, If you go to Policy and Objects > IPv4 Policy, you should be able to right click on the top horizontal bar and select desired column to display.See attached screenshot

User Statistics

User Activity

Technical Tip: Why is TCP port 1000 open

Technical Tip: Override default route settings (default route received from DHCP)

Technical Tip: Simple OCVPN deployment

Technical Tip: How to configure and check which traffic shaper is used

Technical Tip: Configuring a FortiGate unit as a NTP server

Re: SNAT not working on Firewall itself

Re: Finding firewall policy by Policy ID

Technical Tip: Chromecast across subnets

Technical Tip: Why is TCP port 1000 open

Technical Tip: Configuring a FortiGate unit as a N...

KCS

User Statistics

User Activity

You are leaving our website