Support Forum
The Forums are a place to find answers on a range of Fortinet products from peers and product experts.
Allwyn_Mascarenhas
Contributor

fortiap showing some unassigned ip add in the "connecting via" column

HI ppl

 

I have not assigned anything to the fortiaps and still i see this 40.2 ip in the connecting via column as in the picsThe ap is on internal5 port and the port is set to dedicated to ext device with an dummy ip of 169.X.X.X.

 

Screens:

[link]http://i.imgur.com/Tbmx5hY.jpg[/link] http://i.imgur.com/XXJsLKd.jpg

 

I tried to reset the ap following this doc: http://kb.fortinet.com/kb/microsites/search.do?cmd=displayKC&docType=kc&externalId=FD36190&sliceId=1...

 

But i keep getting the wtp-profile not set error and when i try to create some wtp-profile i get the not found in datasource error.

 

Any help please. Thanks.

 

 

1 Solution
Bromont_FTNT
Staff
Staff

The FAP221 has a reset button on the top above the Fortinet logo... it's just a little pinhole.... push in for 10-15 seconds

View solution in original post

2 REPLIES 2
Bromont_FTNT
Staff
Staff

The FAP221 has a reset button on the top above the Fortinet logo... it's just a little pinhole.... push in for 10-15 seconds

Allwyn_Mascarenhas

Bromont wrote:

The FAP221 has a reset button on the top above the Fortinet logo... it's just a little pinhole.... push in for 10-15 seconds

Damn i totally missed it. On top it the fortinet chat fella missed it too. Thanks.

Labels
Top Kudoed Authors