Support Forum
The Forums are a place to find answers on a range of Fortinet products from peers and product experts.
dirkdigs
New Contributor

can i simulate a vpn with two fortigates using cross over cable

can i direct connect two fortigates using a crossover cable and simulate a ipsec vpn tunnel (site to site) is this possible? has anyone ever tried to do this?

7 REPLIES 7
norouzi
Contributor

Hi

Yes, You can do it.

Even you can run IPSEC VPN between 2 VDOM.

Dave_Hall
Honored Contributor

dirkdigs wrote:

can i direct connect two fortigates using a crossover cable and simulate a ipsec vpn tunnel (site to site) is this possible? has anyone ever tried to do this?

I have done this a few times in a test environment, though I do not recall needing to use cross-over cables. YMMV though.

NSE4/FMG-VM64/FortiAnalyzer-VM/6.0 (FWF30E/FW92D/FGT200D/FGT101E/FGT81E)/ FAP220B/221C

NSE4/FMG-VM64/FortiAnalyzer-VM/6.0 (FWF30E/FW92D/FGT200D/FGT101E/FGT81E)/ FAP220B/221C
dirkdigs

great thanks. trying it now.

emnoc
Esteemed Contributor III

Yeap to vdoms and one vdom-link. You can still tie down two ports with a cross over.

 

 

 

PCNSE 

NSE 

StrongSwan  

PCNSE NSE StrongSwan
dirkdigs
New Contributor

vdoms are not valid for this use case.

norouzi
Contributor

Dear dirkdigs, I test this scenario myself with VDOMs.

It works.

Mark_Oakton
Contributor

usually just put a router in the way, otherwise the tunnel is also the gateway

Infosec Partners
Infosec Partners
Announcements

Select Forum Responses to become Knowledge Articles!

Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.

Labels
Top Kudoed Authors