I am able to connect to my IKE v2 IPsec tunnel for remote access using my local laptop plugged directly in to internal1 port, however I cannot ping lan (VLAN gateway 172.16.10.1) that sits behind FortiGate. FortiOS versi...

Simple question.  Should I be concerned that one FortiGate 101F consistently runs at 60% - 75% memory used, while a like 101F with a significantly larger network and hardware load uses 25% - 35% of memory on a daily aver...

HiI lost access to the web ui of the fortigate fw after changing the ha settings from active-passive to standalone. As soon as i selected standlone and clicked OK, fw starts buffering for sometime and then i lost the web...

I made a GNS3 lab with 1 Fortigate (as a gateway) and 2 PCs:Structure:1. PC1 -> Fortigate (Port1).2. PC2 -> Fortigate (Port2).Configurations:Fortigate:config system interfaceedit "port1"set mode staticset ip 10.0.0...

Hi, I' m researching the best Fortigate option for me. I would like to confirm how noisy the 100D is? Unfortunately noise is absent from the product matrix/tech specs. I' m getting fibre very soon, I' ll get 1G...

I have created the BDI interfaces on the Cisco SD-WAN routers with VRRP. Fortigate firewalls are working in active passive mode. We have connections to both routers from each firewall. Please suggest the config to follow...

Hello, In the case of an IPSEC dial up VPN, can you select a user group in "Destination" in fortigate latest version (7.6.3) firewall policy ? I can't seem to have it for either IPSEC dial up VPN or SSL VPN in my fortiga...

Hi , I meet a pb with my Fortigate F60 with 7.2.11 OS when I try to create a Let's Encrypt cert ...The Local In Policy accepts Port 80 and 443 on the concerned interface and there is no conflict with SSL VPN config (Port...