- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Windows 11 / Forticlient 7.0.2.0090 blue screen
forticlient 7.0.2.0090 hangs 98% of the time when connected, Windows 11 then gets an ndis.sys error and then reboots .
Occasionally, it also connects completely and hangs up a few seconds later
with the same error
Error sequence
Establishing a connection with a plant -> 98% -> Windows hangs -> error message Ndis.sys comes -> computer restarts
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
I have same error with Windows 10 / Forticlient 7.0.2.0090.
I got connected with the VPN server but when I pinging a IP address in the network I have connected with via VPN, I got the blue screen with the same ndis.sys error and then reboots.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Same. It works fine on my home desktop, but my work laptop (where I need it the most) does not work. I can connect just fine without issue 99% of the time, but as soon as I even ping an IP through the VPN it bluescreens.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Fortinet
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi
I have the same problem with win 10. I uninstall and reinstall the client 3 times. I tested client v7.0 and also V6.2 and V5.6. Always the same problem with the blue screen.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
same problem.
windows10
forticlient 6.0.10.0297
98% and after blue screen(ndis.sys)
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi all,
Same issue with all WIN10 version (from 20H2 to 22H2)
--> latest updates (all softwares, O365, Win10)
--> latest drivers (HP Elitebook 650 G8,G9 and G10)
We have this problem since Forticlient 7.0.3, same issue with 7.0.6, 7.0.7 and 7.0.8.
BSOD appears only when user are using VPN (can be up to 5 crashes in a row) and not possible to replace by 'VPN only' client, EMS version is protecting our devices.
Since the first issue, answer from Fortinet support is "config is good, wait for the next version"...so now we are waiting the 7.0.9 (end june). If same problem with 7.0.9 we'll put the entire Fabric in the trash.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
same problem.
windows11
forticlient 7.0.2
98% and after blue screen
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Same issue. User upgraded to Windows 11 with existing Forticlient 7.0.1.0083 installation. ndis.sys bluescreens when attempting to connect SSL VPN, but IPsec VPN still worked.
Removed and reinstalled Forticlient, SSL still bluescreens the machine and now IPsec fails on first step.
Bluescreens appear to be really generic, as far as memory dumps go. "Caused By Address : ndis.sys+3989".
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Of, and also tried VPN-only client, still bluescreens on SSL and IPsec won't connect. VPN-only client works fine for both VPN types on my personal Windows 11 machine.
